SCD Full-Color LED Temperature Display
Make critical temperatures easy to see.
Make out-of-limit conditions easier to identify.
The SCD series shows temperatures with 250mm-high digits. Analog mixed mode alternates between 4–20 mA and 0–10 V inputs; Modbus RTU (RS485) is a separate communication mode. Preset colors, configurable alarm thresholds, color changes and flashing combine readings with clear alerts.
Readings, colors and alarms.
Recognize operating status at a glance.
20 preset colors with color-change and flashing alerts for out-of-limit conditions. Two data inputs support time-shared display.
Original display photos · values are readings at the time of photographyBring temperature information to the shop floor.
Help operators respond promptly.
Show critical temperatures in large digits
250mm character height makes readings visible on site, reducing the need to approach smaller screens repeatedly.
Use color and flashing to indicate limits
Configure alarm thresholds, color changes and flashing to distinguish abnormal conditions from normal readings.
Display different temperature data centrally
In analog mixed mode, the display alternates between the 4–20 mA and 0–10 V inputs. Modbus RTU is a separate communication mode.
Choose a convenient configuration method
Local buttons, infrared remote control and RS485 remote control simplify display and alarm configuration.
Key Performance Data
Single-character height
10-inch large-digit displayPreset display colors
For color-based limit alertsAnalog mixed mode
4–20 mA / 0–10 V, alternating displayColor examples are original display photos. Configure alarm colors, thresholds and displayed information for site requirements.
Turn temperature data into visible site information.
Connect with PLK pyrometers and the line control system to show operators temperature readings and out-of-limit alerts.
Temperature display questions
How does the SCD display two analog input channels?
In analog mixed mode, the display alternates between the 4–20 mA and 0–10 V inputs. Modbus RTU over RS485 is a separate communication mode. Confirm the selected mode and data sources for the installation.
Where does the displayed temperature data come from?
The SCD displays temperature data from measurement instruments and the line control system. A PLK infrared pyrometer provides non-contact workpiece-temperature readings. Configure the display interfaces, alarm thresholds and colors for site requirements.
Plan temperature display and alarms for your site.
Share the display location, viewing distance, data sources, interfaces and alarm thresholds.